No. 1 COPPER WIRE
It consists of No. 1 bare, uncoated, unalloyed copper wire, not smaller than No. 16 B & S wire gauge hydraulically compacted or not.
No. 1 HEAVY COPPER
It consists of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and wire not less than 1/16 of an inch thick, free of burnt wire which is brittle; but may include clean copper tubing.
No. 2 COPPER
It consists of miscellaneous, unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. It is free of the following: excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and it is reasonably free of ash.
ALL ALUMINIUM RADIATORS
It consists of clean aluminum radiators and/or condensers. Free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight.
It consists of clean, single-piece, unplated aluminium wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items.
CLEAN MIXED OLD ALLOY SHEET ALUMINUM
It consists of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. Up to 10% Tale permitted.
OLD PURE ALUMINUM WIRE AND CABLE
It consists of old, unalloyed aluminium wire and cable containing not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.
ALUMINIUM AUTO CASTINGS
It consists of all clean automobile aluminum castings of sufficient size to be readily identified and to be free from iron, dirt, brass, bushings, and nonmetallic items. Oil and grease not to total more than 2%.
NEW PRODUCTION ALUMINUM EXTRUSIONS
It consists of one alloy (typically 6063). Material may contain “butt ends” from the extrusion process but must be free of any foreign contamination. Anodized, painted or alloys other than 6063 upon agreement.
CLEAN ALUMINUM LITHOGRAPHIC SHEETS
It consists of 1000 and/or 3000 series alloys, free of paper, plastic, excessively inked sheets, and any other contaminants. Minimum size of 3” (8 cm) in any direction.
POST-CONSUMER ALUMINUM CAN SCRAP
We follow strict segregation and analysis procedures in our scrap yards to be able to provide consistent and reliable secondary raw materials to our global clientele. Our products are confronted to internationally recognized scrap metals specifications.
MIXED HARD/SOFT SCRAP LEAD
It consists of clean lead solids, free of other materials, such as drosses, battery plates, lead covered cable, collapsible tubes, type metals, aluminium, zinc, iron and brass fittings, dirty chemical lead and radioactive materials.
It consists of lead tire balances with or without iron lips. Not including scrap lead, lugs or plates unless specifically agreed to. Free of foreign material.
2XX SERIES STAINLESS STEEL SOLIDS
3XX SERIES STAINLESS STEEL SOLIDS
3XX SERIES STAINLESS STEEL TURNINGS
4XX SERIES STAINLESS STEEL SOLIDS
ALUMINUM COPPER RADIATORS
It consists of clean aluminium and copper radiators, and/or aluminium fins on copper tubing, free of brass tubing, iron and other foreign contamination.
MIXED ELECTRIC MOTORS
It consists of whole electric motors and/or dismantled electric motor parts that are primarily copper- wound. May contain aluminium-wound material, upon agreement. No excessive steel attachments such as gear reducers, iron bases, and pumps, or loose free iron is included.
HMS I/II – 70/30
Σκραπ διάφορο πάχους άνω των 10 mm και μέγιστων διαστάσεων 100 Χ 50 Χ 50 cm.
HMS I/II – 80/20
Ψαλιδισμένο ή πρεσοκομμένο ανάμικτο υλικό σκραπ, πάχους άνω των 3 mm, μέγιστων διαστάσεων 50 Χ 50 Χ 50 cm.